Lightning protection Grounding Electrode / Copper electrical
1. Advanced four dimensional continuous electroplating.
2. Uniform plating over 10mil.
3. Better resist corrosion allowing for a 30-years service life in
4. The electrical conductivity is more than 20%.
Length of supply
The product can be widely used in the communications industry,
power systems, building systems, military installations, railway
systems, broadcasting systems and other equipment industries, the
AC and DC work, safely protected, especially suitable for harsh
surface environment, corrosion resistance requirements to ground
engineering, its market prospect is very broad.
PRODUCT TECHNICAL SPECIFICATION
- Thickness of the copper layer is more than 0.254mm(all can be done
to your demand)
- The core steel rod shall have a tensile strength of not less than
- The steel core is low carbon steel, and the carbon content is about
- The purity of the copper using as cladding shall be 99.9% pure
- The Ground Rod will be capable of being through 90 at a maximum
radius if 100mm with no copper fracture and with no ill effect on
the bond between the steel and the copper cladding.
- Good in anticorrosion that usage-life is more than 50 years or
more, constant low resistance and good plasticity which had the
characteristics of copper as well as steel.
1) The purity of the copper which used as cladding is more than
2) The steel core is low carbon steel which the carbon content is
3) The copper bonded ground rod will be capable of being through 90
at a maximum radius of 100mm with no copper fracture and with no
ill effect on the bond between the steel and the copper cladding.
4) Good in anticorrosion that usage-life is more than 50 years,
constant low resistance and good plasticity which has the
characteristics of the pure copper.
5) The earth rod is fully covered with copper cladding without any
cracks, holes, cavities etc. Preventing exposure of the steel core
to soil and moisture, so as to form a good corrosion resistance.
We can supply threaded rods in all sizes and shapes.
1) Copper Clad Steel Grounding Rod can be made double heads thread,
thread can be packed by plastic sheath
2) One end is pointed and the other end is threaded for extend
3) One end is pointed and the other end is flat.
* Special sizes and shapes and copper thickness can be customised
according to your demands if you can't find the specification you
need in the above table.